Physics · 042AI-2024·All India (AI)

Official CBSE Class 12 Physics 2024 Board Examination Paper with Chief Examiner step-wise marking rubrics (All 33 Questions Solved, 70 Marks).

Jump to:
1
Section A(1-Mark Multiple Choice Questions)
1 Mark
Which of the following is NOT a property of an equipotential surface?
(a) They do not cross each other.
(b) The work done in carrying a charge from one point to another on an equipotential surface is zero.
(c) For a uniform electric field, they are concentric spheres.
(d) They can be imaginary spheres.
CBSE Official Step-Marking AllocationTotal: 1 M
Identify that equipotential surfaces for uniform electric field are parallel equidistant planes, Option (c)
+1 M
NCERT / CBSE Model Answer
Correct Option: (c) For a uniform electric field, they are concentric spheres.
Justification:
1. By definition, for an equipotential surface, the potential is constant everywhere, so W=qΔV=0W = q\Delta V = 0.
2. Two equipotential surfaces can never intersect; otherwise, there would be two different potentials at the point of intersection.
3. For a point charge, equipotential surfaces are concentric spheres.
4. However, for a uniform electric field directed along a specific axis, equipotential surfaces are equidistant planes perpendicular to the field lines, NOT concentric spheres.
Therefore, statement (c) is false and is the correct answer.
Chief Examiner Evaluation Report & Pitfalls:

Point charges produce concentric spherical equipotentials; line charges produce coaxial cylinders; uniform electric fields produce parallel planar equipotentials.

2
Section A(1-Mark Multiple Choice Questions)
1 Mark
An electric dipole placed in an electric field of intensity 2×105 N/C2 \times 10^5\text{ N/C} at an angle of 30∘30^\circ experiences a torque equal to 4 Nm4\text{ Nm}. The charge on the dipole of dipole length 2 cm2\text{ cm} is:
(a) 2 C2\text{ C}
(b) 2μC2\mu\text{C}
(c) 2 mC2\text{ mC}
(d) 4 mC4\text{ mC}
CBSE Official Step-Marking AllocationTotal: 1 M
Use formula q=τ/(2aEsin⁡θ)q = \tau / (2a E \sin\theta) and substitute values to obtain 2 mC2\text{ mC}, Option (c)
+1 M
NCERT / CBSE Model Answer
Correct Option: (c) 2 mC2\text{ mC}
Calculation & Justification:
1. Formula for torque on an electric dipole:
τ=pEsin⁡θ=(q⋅2a)Esin⁡θ\tau = pE\sin\theta = (q \cdot 2a)E\sin\theta

2. Rearranging for charge qq:
q=τ2a⋅Esin⁡θq = \frac{\tau}{2a \cdot E\sin\theta}

3. Given values:
- τ=4 Nm\tau = 4\text{ Nm}
- Dipole length 2a=2 cm=2×10−2 m2a = 2\text{ cm} = 2 \times 10^{-2}\text{ m}
- E=2×105 N/CE = 2 \times 10^5\text{ N/C}
- θ=30∘  ⟹  sin⁡30∘=0.5=12\theta = 30^\circ \implies \sin 30^\circ = 0.5 = \frac{1}{2}
4. Compute qq:
q=4(2×10−2)(2×105)(0.5)=42×103=2×10−3 C=2 mCq = \frac{4}{(2 \times 10^{-2})(2 \times 10^5)(0.5)} = \frac{4}{2 \times 10^3} = 2 \times 10^{-3}\text{ C} = 2\text{ mC}

Therefore, the correct option is (c).
Chief Examiner Evaluation Report & Pitfalls:

The dipole length is $2a = 2\text{ cm}$, not $a = 2\text{ cm}$. Convert centimeters to meters ($2 \times 10^{-2}\text{ m}$) before calculation.

3
Section A(1-Mark Multiple Choice Questions)
1 Mark
A metallic plate exposed to white light emits electrons. For which of the following colours of light will the stopping potential be maximum?
(a) Blue
(b) Yellow
(c) Red
(d) Violet
CBSE Official Step-Marking AllocationTotal: 1 M
Identify that violet light has highest frequency resulting in highest stopping potential, Option (d)
+1 M
NCERT / CBSE Model Answer
Correct Option: (d) Violet
Justification:
1. By Einstein's photoelectric equation:
eV0=hν−Φ0=hcλ−Φ0eV_0 = h\nu - \Phi_0 = \frac{hc}{\lambda} - \Phi_0

2. Stopping potential V0V_0 is directly proportional to the frequency ν\nu (and inversely proportional to wavelength λ\lambda) of incident light.
3. In the visible spectrum (VIBGYOR), violet light has the shortest wavelength and the highest frequency (highest photon energy hνh\nu).
4. Consequently, photoelectrons emitted by violet light possess the maximum maximum kinetic energy (Kmax⁡K_{\max}), requiring the greatest stopping potential V0V_0.
Chief Examiner Evaluation Report & Pitfalls:

Higher frequency $\implies$ higher photon energy $\implies$ greater maximum kinetic energy of emitted photoelectrons $\implies$ higher stopping potential.

4
Section A(1-Mark Multiple Choice Questions)
1 Mark
When alpha particles are sent through a thin gold foil, most of them go straight through the foil because:
(a) alpha particles are positively charged
(b) the mass of an alpha particle is more than the mass of an electron
(c) most of the part of an atom is empty space
(d) all alpha particles move with the same velocity
CBSE Official Step-Marking AllocationTotal: 1 M
Correlate undeflected alpha particles with atom consisting mostly of empty space, Option (c)
+1 M
NCERT / CBSE Model Answer
Correct Option: (c) most of the part of an atom is empty space
Justification:
In Rutherford's alpha-particle scattering experiment, nearly 99.86%99.86\% of incident α\alpha-particles passed straight through the gold foil without suffering any deflection. This led Rutherford to conclude that most of the space inside an atom is empty, with the positive charge and almost the entire mass concentrated in a tiny central nucleus.
Chief Examiner Evaluation Report & Pitfalls:

Direct consequence of Rutherford's nuclear model of the atom.

5
Section A(1-Mark Multiple Choice Questions)
1 Mark
An electron is moving along the positive xx-axis in a magnetic field parallel to the positive yy-axis. In what direction will the magnetic Lorentz force act on the electron?
(a) along positive zz-axis
(b) along negative zz-axis
(c) along positive yy-axis
(d) along negative xx-axis
CBSE Official Step-Marking AllocationTotal: 1 M
Compute v⃗×B⃗=+k^\vec{v} \times \vec{B} = +\hat{k}, then reverse direction due to negative charge of electron to get −k^-\hat{k}, Option (b)
+1 M
NCERT / CBSE Model Answer
Correct Option: (b) along negative zz-axis
Calculation & Justification:
1. Magnetic Lorentz force on a moving charge qq is:
F⃗m=q(v⃗×B⃗)\vec{F}_m = q(\vec{v} \times \vec{B})

2. Here, velocity v⃗=vi^\vec{v} = v\hat{i}, magnetic field B⃗=Bj^\vec{B} = B\hat{j}, and charge of electron q=−eq = -e.
3. Compute cross product v⃗×B⃗\vec{v} \times \vec{B}:
i^×j^=k^(positive z-axis)\hat{i} \times \hat{j} = \hat{k} \quad (\text{positive } z\text{-axis})

4. Multiplying by negative electronic charge −e-e:
F⃗m=−e(vBk^)=−(evB)k^\vec{F}_m = -e(vB\hat{k}) = -(evB)\hat{k}

5. Hence, the force acts along the negative zz-axis (Option b).
Chief Examiner Evaluation Report & Pitfalls:

Do not forget that the charge of an electron is negative ($-e$), which reverses the right-hand thumb rule direction.

6
Section A(1-Mark Multiple Choice Questions)
1 Mark
The relative magnetic permeability of a substance XX is slightly less than unity (μr<1\mu_r < 1) and that of substance YY is slightly more than unity (μr>1\mu_r > 1). Then:
(a) XX is paramagnetic and YY is ferromagnetic
(b) XX is diamagnetic and YY is ferromagnetic
(c) XX is ferromagnetic and YY is paramagnetic
(d) XX is diamagnetic and YY is paramagnetic
CBSE Official Step-Marking AllocationTotal: 1 M
Identify μr<1\mu_r < 1 as diamagnetic and μr>1\mu_r > 1 (slightly) as paramagnetic, Option (d)
+1 M
NCERT / CBSE Model Answer
Correct Option: (d) XX is diamagnetic and YY is paramagnetic
Justification:
1. Diamagnetic materials: Susceptibility χm\chi_m is small and negative (−1≤χm<0-1 \le \chi_m < 0), so relative permeability μr=1+χm\mu_r = 1 + \chi_m is slightly less than unity (0≤μr<10 \le \mu_r < 1). Thus, XX is diamagnetic.
2. Paramagnetic materials: Susceptibility χm\chi_m is small and positive, so relative permeability μr=1+χm\mu_r = 1 + \chi_m is slightly greater than unity (μr>1\mu_r > 1). Thus, YY is paramagnetic.
3. (Ferromagnetic materials have μr≫1\mu_r \gg 1, on the order of hundreds or thousands).
Chief Examiner Evaluation Report & Pitfalls:

Diamagnetic: $0 \le \mu_r < 1$; Paramagnetic: $\mu_r > 1$ (slightly); Ferromagnetic: $\mu_r \gg 1$.

7
Section A(1-Mark Multiple Choice Questions)
1 Mark
An ammeter of resistance 0.81 Ω0.81\,\Omega reads up to 1 A1\text{ A}. The value of the required shunt to increase its range to 10 A10\text{ A} is:
(a) 0.9 Ω0.9\,\Omega
(b) 0.09 Ω0.09\,\Omega
(c) 0.03 Ω0.03\,\Omega
(d) 0.3 Ω0.3\,\Omega
CBSE Official Step-Marking AllocationTotal: 1 M
Use formula S=IgGI−Ig=1×0.819=0.09 ΩS = \frac{I_g G}{I - I_g} = \frac{1 \times 0.81}{9} = 0.09\,\Omega, Option (b)
+1 M
NCERT / CBSE Model Answer
Correct Option: (b) 0.09 Ω0.09\,\Omega
Calculation & Justification:
1. Let Ig=1 AI_g = 1\text{ A} be the full-scale deflection current of the galvanometer/ammeter, and G=0.81 ΩG = 0.81\,\Omega be its resistance.
2. Required maximum current range I=10 AI = 10\text{ A}.
3. Shunt resistance formula:
S=Ig⋅GI−IgS = \frac{I_g \cdot G}{I - I_g}

4. Substitute values:
S=1×0.8110−1=0.819=0.09 ΩS = \frac{1 \times 0.81}{10 - 1} = \frac{0.81}{9} = 0.09\,\Omega

Therefore, Option (b) is correct.
Chief Examiner Evaluation Report & Pitfalls:

The current dividing through shunt is $I_s = I - I_g$. Voltage across shunt equals voltage across meter: $S(I - I_g) = I_g G$.

8
Section A(1-Mark Multiple Choice Questions)
1 Mark
An electron with orbital angular momentum LL moving around a nucleus has a magnetic dipole moment μl\mu_l given by:
(a) eL2m\frac{eL}{2m}
(b) eL3m\frac{eL}{3m}
(c) eLm\frac{eL}{m}
(d) 2eLm\frac{2eL}{m}
CBSE Official Step-Marking AllocationTotal: 1 M
Derive μl=eL2m\mu_l = \frac{e L}{2m} using gyromagnetic ratio μL=e2m\frac{\mu}{L} = \frac{e}{2m}, Option (a)
+1 M
NCERT / CBSE Model Answer
Correct Option: (a) eL2m\frac{eL}{2m}
Justification:
1. A revolving electron constitutes an orbital current I=eT=e2πr/v=ev2πrI = \frac{e}{T} = \frac{e}{2\pi r / v} = \frac{ev}{2\pi r}.
2. Orbital magnetic moment is μl=I⋅A=(ev2πr)(πr2)=evr2\mu_l = I \cdot A = \left(\frac{ev}{2\pi r}\right)(\pi r^2) = \frac{evr}{2}.
3. Orbital angular momentum is L=mvr  ⟹  vr=LmL = mvr \implies vr = \frac{L}{m}.
4. Substituting vrvr into magnetic moment:
μl=e2(Lm)=eL2m\mu_l = \frac{e}{2}\left(\frac{L}{m}\right) = \frac{eL}{2m}

(In vector form: μ⃗l=−e2mL⃗\vec{\mu}_l = -\frac{e}{2m}\vec{L}, where gyromagnetic ratio is e2m\frac{e}{2m}).
Chief Examiner Evaluation Report & Pitfalls:

The gyromagnetic ratio $\frac{\mu_l}{L} = \frac{e}{2m_e}$ is a fundamental constant for an orbital electron.

9
Section A(1-Mark Multiple Choice Questions)
1 Mark
The large scale transmission of electrical energy over long distances is done with the use of transformers. The voltage output of the generator is stepped-up because:
(a) current is increased and power loss (I2RI^2R) is increased
(b) current is decreased and power loss (I2RI^2R) is increased
(c) current is increased and power loss (I2RI^2R) is reduced
(d) current is reduced and power loss (I2RI^2R) is reduced
CBSE Official Step-Marking AllocationTotal: 1 M
Identify that higher transmission voltage lowers current, reducing I2RI^2 R dissipation, Option (d)
+1 M
NCERT / CBSE Model Answer
Correct Option: (d) current is reduced and power loss (I2RI^2R) is reduced
Justification:
1. Transmitted electric power is P=VIP = V I. For a given power level, stepping up voltage VV by a factor kk reduces current II by the same factor kk.
2. Joule heating / transmission loss in power cables is Ploss=I2RP_{\text{loss}} = I^2 R.
3. Reducing the current II dramatically decreases I2RI^2 R heat losses by a factor of k2k^2, making high-voltage transmission economically viable and energy-efficient.
Chief Examiner Evaluation Report & Pitfalls:

Loss is proportional to $I^2$. Reducing $I$ by stepping up $V$ is the cornerstone of AC power distribution grid design.

10
Section A(1-Mark Multiple Choice Questions)
1 Mark
The electric field E⃗\vec{E} and magnetic field B⃗\vec{B} components of an electromagnetic wave travel in free space along the +z+z-axis. If E⃗\vec{E} oscillates along the +x+x-axis, the magnetic field B⃗\vec{B} oscillates along:
(a) +y+y-axis
(b) −y-y-axis
(c) +z+z-axis
(d) −x-x-axis
CBSE Official Step-Marking AllocationTotal: 1 M
Apply propagation direction rule k^=E^×B^\hat{k} = \hat{E} \times \hat{B} to determine B⃗\vec{B} along +y+y-axis, Option (a)
+1 M
NCERT / CBSE Model Answer
Correct Option: (a) +y+y-axis
Justification:
1. In an electromagnetic wave, the direction of propagation is given by the Poynting vector:
S^=E^×B^\hat{S} = \hat{E} \times \hat{B}

2. Propagation is along +z+z-axis (k^\hat{k}).
3. Electric field is along +x+x-axis (i^\hat{i}).
4. We require i^×B^=k^\hat{i} \times \hat{B} = \hat{k}.
5. Since i^×j^=k^\hat{i} \times \hat{j} = \hat{k}, B^\hat{B} must point along the +y+y-axis (Option a).
Chief Examiner Evaluation Report & Pitfalls:

The triad $(\vec{E}, \vec{B}, \vec{k})$ forms a right-handed orthogonal system: $\vec{E} \times \vec{B} \parallel \vec{c}$.

11
Section A(1-Mark Multiple Choice Questions)
1 Mark
In a coil of resistance 100 Ω100\,\Omega, a current is induced by changing the magnetic flux through it. The variation of current with time is a right triangle with base t=0.5 st = 0.5\text{ s} and peak current I0=10 AI_0 = 10\text{ A} at t=0t = 0. The total change in magnetic flux through the coil is:
(a) 25 Wb25\text{ Wb}
(b) 125 Wb125\text{ Wb}
(c) 200 Wb200\text{ Wb}
(d) 250 Wb250\text{ Wb}
CBSE Official Step-Marking AllocationTotal: 1 M
Calculate charge q=Area=2.5 Cq = \text{Area} = 2.5\text{ C} and ΔΦ=qR=250 Wb\Delta\Phi = q R = 250\text{ Wb}, Option (d)
+1 M
NCERT / CBSE Model Answer
Correct Option: (d) 250 Wb250\text{ Wb}
Calculation & Justification:
1. Induced charge qq flowing through the coil is related to change in magnetic flux by:
ΔΦ=q⋅R\Delta\Phi = q \cdot R

2. The total charge qq is the area under the current-time (I−tI - t) graph:
q=Area under I−t=12×base×height=12×0.5 s×10 A=2.5 Cq = \text{Area under } I - t = \frac{1}{2} \times \text{base} \times \text{height} = \frac{1}{2} \times 0.5\text{ s} \times 10\text{ A} = 2.5\text{ C}

3. Change in magnetic flux:
ΔΦ=q⋅R=2.5 C×100 Ω=250 Wb\Delta\Phi = q \cdot R = 2.5\text{ C} \times 100\,\Omega = 250\text{ Wb}

Therefore, Option (d) is correct.
Chief Examiner Evaluation Report & Pitfalls:

Remember the fundamental relationship: $\Delta\Phi = R \int I \, dt = R \cdot q$. Charge is the area under the $I-t$ curve.

12
Section A(1-Mark Multiple Choice Questions)
1 Mark
The energy of an electron in the nthn^{\text{th}} orbit of hydrogen atom is En=−13.6n2 eVE_n = -\frac{13.6}{n^2}\text{ eV}. The negative sign of energy indicates that:
(a) electron is free to move
(b) electron is bound to the nucleus
(c) electron has lost all kinetic energy
(d) electron cannot emit photons
CBSE Official Step-Marking AllocationTotal: 1 M
State that negative total mechanical energy signifies a bound state to the nucleus, Option (b)
+1 M
NCERT / CBSE Model Answer
Correct Option: (b) electron is bound to the nucleus
Justification:
The negative total energy indicates that the electron exists in an attractive potential well created by the positively charged nucleus. Energy must be supplied from outside to overcome this electrostatic attraction and liberate the electron to infinity (E=0E = 0). Hence, the negative sign signifies a bound state.
Chief Examiner Evaluation Report & Pitfalls:

Total energy $E < 0$ means bound system; $E \ge 0$ means unbound, free particle.

13
Section A(1-Mark Assertion-Reason Questions)
1 Mark
Two statements are given, one labelled Assertion (A) and the other labelled Reason (R):
Assertion (A): For radiation of frequency greater than the threshold frequency, the photoelectric current is proportional to the intensity of incident radiation.
Reason (R): Greater intensity means a greater number of photons incident per second, each knocking out one photoelectron.
Select the correct answer:
(a) Both A and R are true and R is the correct explanation of A
(b) Both A and R are true and R is not the correct explanation of A
(c) A is true but R is false
(d) A is false but R is true
CBSE Official Step-Marking AllocationTotal: 1 M
Identify that higher intensity increases photon flux knocking out more photoelectrons, Option (a)
+1 M
NCERT / CBSE Model Answer
Correct Option: (a) Both A and R are true and R is the correct explanation of A
Justification:
1. In the photon picture of light, intensity at a fixed frequency is directly proportional to the number of photons incident on the metal surface per unit area per unit time.
2. In a one-to-one photon-electron collision process, more incident photons liberate more photoelectrons per second, directly increasing the saturation photoelectric current (I∝IntensityI \propto \text{Intensity}).
3. Both statements are true, and Reason (R) is the exact theoretical explanation of Assertion (A).
Chief Examiner Evaluation Report & Pitfalls:

Intensity affects the NUMBER of emitted photoelectrons (current), whereas frequency affects the KINETIC ENERGY (stopping potential).

14
Section A(1-Mark Assertion-Reason Questions)
1 Mark
Two statements are given, one labelled Assertion (A) and the other labelled Reason (R):
Assertion (A): Putting a p-type semiconductor slab directly in physical contact with an n-type semiconductor slab cannot form a p-n junction.
Reason (R): Any physical contact results in microscopic roughness and discontinuity at the atomic scale compared to interatomic spacing (∼1 A˚\sim 1\text{ \AA}), preventing charge carrier diffusion.
Select the correct answer:
(a) Both A and R are true and R is the correct explanation of A
(b) Both A and R are true and R is not the correct explanation of A
(c) A is true but R is false
(d) A is false but R is true
CBSE Official Step-Marking AllocationTotal: 1 M
Identify that macroscopic contact cannot provide atomic-level lattice continuity, Option (a)
+1 M
NCERT / CBSE Model Answer
Correct Option: (a) Both A and R are true and R is the correct explanation of A
Justification:
1. A p-n junction requires continuous crystalline lattice continuity across the junction interface with interatomic spacing on the order of 2–3 A˚2\text{--}3\text{ \AA}.
2. Simply pressing two macroscopic semiconductor slabs together leaves surface oxides, air pockets, and microscopic roughness (>1000 A˚> 1000\text{ \AA}), which acts as an insulating barrier that prevents carrier diffusion.
3. Therefore, p-n junctions must be grown epitaxially or fabricated by diffusion/doping into a single crystal.
Chief Examiner Evaluation Report & Pitfalls:

NCERT explicit point: You cannot make a p-n junction by simply pressing a p-type and n-type slab together because surface roughness exceeds atomic spacing.

15
Section A(1-Mark Assertion-Reason Questions)
1 Mark
Two statements are given, one labelled Assertion (A) and the other labelled Reason (R):
Assertion (A): An electron has higher potential energy when it is at a location associated with a negative value of potential, and lower potential energy at a positive potential.
Reason (R): Electric potential is defined as work done per unit positive charge.
Select the correct answer:
(a) Both A and R are true and R is the correct explanation of A
(b) Both A and R are true and R is not the correct explanation of A
(c) A is true but R is false
(d) A is false but R is true
CBSE Official Step-Marking AllocationTotal: 1 M
Identify that both A and R are true facts, but R does not explain the negative charge inversion, Option (b)
+1 M
NCERT / CBSE Model Answer
Correct Option: (b) Both A and R are true and R is not the correct explanation of A
Justification:
1. Electric potential energy of charge qq is U=qVU = qV. For an electron with negative charge q=−eq = -e:
U=−eVU = -eV

- At negative potential V=−V0V = -V_0: U=−e(−V0)=+eV0U = -e(-V_0) = +eV_0 (higher potential energy).
- At positive potential V=+V0V = +V_0: U=−e(+V0)=−eV0U = -e(+V_0) = -eV_0 (lower potential energy).
Hence, Assertion (A) is true.
2. Reason (R) correctly states the definition of electric potential (V=W/q0V = W/q_0). Reason is a true statement.
3. However, (R) does not explicitly mention the negative charge of the electron which reverses the sign of U=qVU = qV. Therefore, (R) is not the complete explanation.
Chief Examiner Evaluation Report & Pitfalls:

For negative charges, potential energy is inverted: negative charges naturally accelerate from lower potential to higher potential.

16
Section A(1-Mark Assertion-Reason Questions)
1 Mark
Two statements are given, one labelled Assertion (A) and the other labelled Reason (R):
Assertion (A): Propagation of light through an optical fibre is due to total internal reflection occurring at the core-cladding interface.
Reason (R): Refractive index of the material of the core of the optical fibre is less than that of the cladding.
Select the correct answer:
(a) Both A and R are true and R is the correct explanation of A
(b) Both A and R are true and R is not the correct explanation of A
(c) A is true but R is false
(d) A is false but R is true
CBSE Official Step-Marking AllocationTotal: 1 M
Recognize that TIR requires core index > cladding index, making A true and R false, Option (c)
+1 M
NCERT / CBSE Model Answer
Correct Option: (c) A is true but R is false
Justification:
1. Assertion (A) is true: Optical fibres guide light via successive total internal reflections along the core.
2. Reason (R) is false: Total internal reflection can only take place when light travels from an optically denser medium into an optically rarer medium. Therefore, the refractive index of the core must be greater than that of the cladding (ncore>ncladdingn_{\text{core}} > n_{\text{cladding}}).
3. Since Reason states the core index is less, (R) is false.
Chief Examiner Evaluation Report & Pitfalls:

Condition for TIR: Light must travel from denser to rarer medium ($n_1 > n_2$) at an incident angle greater than the critical angle ($i > i_c$).

17
Section B(2-Mark Very Short Answer Questions)
2 Marks
(a) Name the semiconductor device used to convert alternating voltage into direct voltage.
(b) Draw a neat labeled circuit diagram of a full-wave rectifier using two p-n junction diodes and a center-tapped transformer.
CBSE Official Step-Marking AllocationTotal: 2 M
Name Rectifier (1.0M)
+1 M
Draw correct circuit diagram with center-tapped transformer, two diodes D1 and D2, and load resistor RL (1.0M)
+1 M
NCERT / CBSE Model Answer
Step-by-step Solution:
(a) Device Name [1 Mark]:
- Rectifier (specifically, semiconductor diode rectifier).
(b) Circuit Diagram of Full-Wave Rectifier [1 Mark]:
- Components: Center-tapped secondary of transformer, two junction diodes (D1D_1 and D2D_2), and load resistor RLR_L.
- Working connection:
- Upper terminal of secondary coil connected to anode of D1D_1.
- Lower terminal connected to anode of D2D_2.
- Cathodes of D1D_1 and D2D_2 tied together and connected to one terminal of RLR_L.
- Center-tap of transformer connected to the other terminal of RLR_L.
- In positive half-cycle, D1D_1 conducts; in negative half-cycle, D2D_2 conducts, producing unidirectional output across RLR_L.
Chief Examiner Evaluation Report & Pitfalls:

Clearly mark diode polarities (p-side and n-side) and label the center tap of the transformer.

18
Section B(2-Mark Very Short Answer Questions)
2 Marks
An electromagnetic wave is travelling along the +z+z-axis in free space. The wavelength of the wave is 1.5 cm1.5\text{ cm} and its electric field amplitude is 30 V/m30\text{ V/m}.
(a) Identify the electromagnetic spectrum region to which this wave belongs.
(b) Calculate the amplitude of the oscillating magnetic field.
CBSE Official Step-Marking AllocationTotal: 2 M
Identify spectrum as Microwaves based on λ=1.5 cm\lambda = 1.5\text{ cm} (1.0M)
+1 M
Calculate B0=E0/c=30/(3×108)=10−7 TB_0 = E_0 / c = 30 / (3 \times 10^8) = 10^{-7}\text{ T} with SI units (1.0M)
+1 M
NCERT / CBSE Model Answer
Step-by-step Solution:
(a) Electromagnetic Region [1 Mark]:
- Given wavelength λ=1.5 cm=1.5×10−2 m=0.015 m\lambda = 1.5\text{ cm} = 1.5 \times 10^{-2}\text{ m} = 0.015\text{ m}.
- This wavelength lies in the range 1 mm≤λ≤1 m1\text{ mm} \le \lambda \le 1\text{ m}, which corresponds to Microwaves.
(b) Magnetic Field Amplitude [1 Mark]:
- The relation between electric and magnetic field amplitudes in free space is:
c=E0B0  ⟹  B0=E0cc = \frac{E_0}{B_0} \implies B_0 = \frac{E_0}{c}

- Substitute E0=30 V/mE_0 = 30\text{ V/m} and c=3×108 m/sc = 3 \times 10^8\text{ m/s}:
B0=303×108=10×10−8 T=10−7 TB_0 = \frac{30}{3 \times 10^8} = 10 \times 10^{-8}\text{ T} = 10^{-7}\text{ T}

- Amplitude of the oscillating magnetic field is 10−7 T10^{-7}\text{ T} (or 100 nT100\text{ nT}).
Chief Examiner Evaluation Report & Pitfalls:

Do not forget the unit of magnetic field (Tesla, T).

19
Section B(2-Mark Very Short Answer Questions)
2 Marks
Draw a plot showing the variation of binding energy per nucleon (BE/A\text{BE}/A) as a function of mass number AA. Write two main conclusions that can be drawn regarding the nature of nuclear forces from this plot.
CBSE Official Step-Marking AllocationTotal: 2 M
Draw accurate BE/A\text{BE}/A curve with peak at Fe-56 (1.0M)
+1 M
State two properties: short-range saturation property and strong attractive nature (1.0M)
+1 M
NCERT / CBSE Model Answer
Step-by-step Solution:
1. Plot of BE/A\text{BE}/A vs AA [1 Mark]:
- Curve rises sharply for light nuclei (A<30A < 30), showing peaks for 4He,12C,16O^{4}\text{He}, ^{12}\text{C}, ^{16}\text{O}.
- Reaches a broad maximum of ≈8.75 MeV/nucleon\approx 8.75\text{ MeV/nucleon} around A=56A = 56 (56Fe^{56}\text{Fe}).
- Drops gradually for heavier nuclei, falling to ≈7.6 MeV/nucleon\approx 7.6\text{ MeV/nucleon} for 238U^{238}\text{U}.
2. Conclusions regarding Nuclear Forces [1 Mark (0.5M each)]:
- Saturation of Nuclear Forces: The constancy of BE/A\text{BE}/A over a broad mass range (30≤A≤17030 \le A \le 170) shows that nuclear force is short-ranged and acts only between immediate nearest-neighbor nucleons.
- Strongly Attractive Nature: The high binding energy value (∼8 MeV/nucleon\sim 8\text{ MeV/nucleon}) proves that the nuclear force is overwhelmingly strong and attractive, easily overcoming Coulomb repulsion between protons.
Chief Examiner Evaluation Report & Pitfalls:

Peak is at $^{56}\text{Fe}$ (8.75 MeV/nucleon); light nuclei undergo fusion, heavy nuclei undergo fission to reach higher $\text{BE}/A$.

20
Section B(2-Mark Very Short Answer Questions)
2 Marks
A heating element connected to a 230 V230\text{ V} supply draws an initial current of 3.2 A3.2\text{ A} at room temperature T0=27∘CT_0 = 27^\circ\text{C}, which settles after a few seconds to a steady current of 2.8 A2.8\text{ A}. What is the steady temperature of the heating element if the temperature coefficient of resistance of the heating material is 1.70×10−4 ∘C−11.70 \times 10^{-4}\,^\circ\text{C}^{-1}?
CBSE Official Step-Marking AllocationTotal: 2 M
Calculate initial resistance R0=71.88 ΩR_0 = 71.88\,\Omega and steady resistance R=82.14 ΩR = 82.14\,\Omega (1.0M)
+1 M
Apply T−T0=R−R0αR0T - T_0 = \frac{R - R_0}{\alpha R_0} and obtain final temperature T=867.3∘CT = 867.3^\circ\text{C} (1.0M)
+1 M
NCERT / CBSE Model Answer
Step-by-step Solution:
1. Initial resistance at room temperature T0=27∘CT_0 = 27^\circ\text{C}:
R0=VI0=2303.2=71.875 ΩR_0 = \frac{V}{I_0} = \frac{230}{3.2} = 71.875\,\Omega

2. Steady-state resistance at temperature TT:
R=VI=2302.8=82.143 ΩR = \frac{V}{I} = \frac{230}{2.8} = 82.143\,\Omega

3. Using temperature dependence formula R=R0[1+α(T−T0)]R = R_0[1 + \alpha(T - T_0)], change in temperature ΔT=T−T0\Delta T = T - T_0 is:
ΔT=R−R0αR0=VI−VI0α(VI0)=1I−1I0αI0=I0−IαI\Delta T = \frac{R - R_0}{\alpha R_0} = \frac{\frac{V}{I} - \frac{V}{I_0}}{\alpha \left(\frac{V}{I_0}\right)} = \frac{\frac{1}{I} - \frac{1}{I_0}}{\frac{\alpha}{I_0}} = \frac{I_0 - I}{\alpha I}

4. Substitute values:
ΔT=3.2−2.8(1.70×10−4)(2.8)=0.44.76×10−4=40004.76≈840.3∘C\Delta T = \frac{3.2 - 2.8}{(1.70 \times 10^{-4})(2.8)} = \frac{0.4}{4.76 \times 10^{-4}} = \frac{4000}{4.76} \approx 840.3^\circ\text{C}

5. Steady temperature TT:
T=T0+ΔT=27∘C+840.3∘C=867.3∘CT = T_0 + \Delta T = 27^\circ\text{C} + 840.3^\circ\text{C} = 867.3^\circ\text{C}

Hence, the steady temperature is 867.3∘C867.3^\circ\text{C} (or 867∘C867^\circ\text{C}).
Chief Examiner Evaluation Report & Pitfalls:

Do not forget to add room temperature $T_0 = 27^\circ\text{C}$ to $\Delta T$ to find the absolute final temperature.

21
Section B(2-Mark Very Short Answer Questions)
2 Marks
Calculate the nuclear energy required to break up all the nuclei in 3 grams3\text{ grams} of copper coin (2963Cu^{63}_{29}\text{Cu}) into their constituent protons and neutrons.
Given:
- Mass of 2963Cu^{63}_{29}\text{Cu} nucleus =62.92960 u= 62.92960\text{ u}
- Mass of a proton mp=1.00783 um_p = 1.00783\text{ u}
- Mass of a neutron mn=1.00867 um_n = 1.00867\text{ u}
CBSE Official Step-Marking AllocationTotal: 2 M
Calculate mass defect Δm=0.59225 u\Delta m = 0.59225\text{ u} and single-atom binding energy 551.7 MeV551.7\text{ MeV} (1.0M)
+1 M
Calculate number of atoms in 3g and compute total energy 1.58×1025 MeV1.58 \times 10^{25}\text{ MeV} (1.0M)
+1 M
NCERT / CBSE Model Answer
Step-by-step Solution:
1. A 2963Cu^{63}_{29}\text{Cu} nucleus contains Z=29Z = 29 protons and N=63−29=34N = 63 - 29 = 34 neutrons.
2. Mass Defect (Δm\Delta m):
Δm=[Zmp+Nmn]−MCu\Delta m = [Z m_p + N m_n] - M_{\text{Cu}}

Δm=[29×1.00783+34×1.00867]−62.92960\Delta m = [29 \times 1.00783 + 34 \times 1.00867] - 62.92960

Δm=[29.22707+34.29478]−62.92960=63.52185−62.92960=0.59225 u\Delta m = [29.22707 + 34.29478] - 62.92960 = 63.52185 - 62.92960 = 0.59225\text{ u}

3. Binding Energy per nucleus:
BE=Δm×931.5 MeV=0.59225×931.5≈551.68 MeV\text{BE} = \Delta m \times 931.5\text{ MeV} = 0.59225 \times 931.5 \approx 551.68\text{ MeV}

4. Number of nuclei in 3 g3\text{ g} of copper:
Nnuclei=363×6.023×1023=2.868×1022 nucleiN_{\text{nuclei}} = \frac{3}{63} \times 6.023 \times 10^{23} = 2.868 \times 10^{22} \text{ nuclei}

5. Total Nuclear Energy Required:
Etotal=551.68 MeV×2.868×1022≈1.58×1025 MeV=2.53×1012 JE_{\text{total}} = 551.68\text{ MeV} \times 2.868 \times 10^{22} \approx 1.58 \times 10^{25}\text{ MeV} = 2.53 \times 10^{12}\text{ J}
Chief Examiner Evaluation Report & Pitfalls:

Break-up energy is equal to total binding energy. Multiply energy per atom by the number of atoms in the given sample mass.

22
Section C(3-Mark Short Answer Questions)
3 Marks
An infinite ladder network of resistances is formed by repeating the unit shown in the figure, where each series resistor is 1 Ω1\,\Omega and each shunt resistor is x Ωx\,\Omega. If the equivalent resistance between the input terminals is 2 Ω2\,\Omega, find the value of xx.
CBSE Official Step-Marking AllocationTotal: 3 M
Formulate infinite ladder recursive relation Req=1+xReqx+ReqR_{eq} = 1 + \frac{x R_{eq}}{x + R_{eq}} (1.5M)
+1.5 M
Substitute Req=2 ΩR_{eq} = 2\,\Omega and solve linear equation for x=2 Ωx = 2\,\Omega (1.5M)
+1.5 M
NCERT / CBSE Model Answer
Step-by-step Solution:
1. Let ReqR_{eq} be the equivalent resistance of the infinite ladder across input terminals. Because the ladder is infinite, removing the first repeating stage leaves the identical infinite ladder with equivalent resistance ReqR_{eq}.
2. The circuit simplifies to: a series resistor of 1 Ω1\,\Omega in series with the parallel combination of shunt resistor xx and ReqR_{eq}:
Req=1+x⋅Reqx+ReqR_{eq} = 1 + \frac{x \cdot R_{eq}}{x + R_{eq}}

3. Given Req=2 ΩR_{eq} = 2\,\Omega:
2=1+2xx+22 = 1 + \frac{2x}{x + 2}

4. Simplify:
1=2xx+21 = \frac{2x}{x + 2}

x+2=2x  ⟹  x=2 Ωx + 2 = 2x \implies x = 2\,\Omega

*(Or for alternative infinite network variants with series resistor 1 Ω1\,\Omega and shunt xx yielding quadratic x=(2−1) Ωx = (\sqrt{2} - 1)\,\Omega)*.
5. Therefore, the value of the resistance xx is 2 Ω2\,\Omega.
Chief Examiner Evaluation Report & Pitfalls:

In an infinite ladder, truncating one stage does not change the total equivalent resistance.

23
Section C(3-Mark Short Answer Questions)
3 Marks
Using Ampere's circuital law, derive an expression for the magnetic field at a distance rr from the axis of a long straight solid cylindrical conductor of radius aa carrying a steady current II uniformly distributed across its cross-section:
(a) outside the wire (r>ar > a)
(b) inside the wire (r<ar < a)
Draw a plot showing the variation of BB with distance rr from the centre of the cylinder.
CBSE Official Step-Marking AllocationTotal: 3 M
Derive outside field B=μ0I2πrB = \frac{\mu_0 I}{2\pi r} for r>ar > a (1.0M)
+1 M
Derive inside field B=μ0Ir2πa2B = \frac{\mu_0 I r}{2\pi a^2} using enclosed current fraction for r<ar < a (1.0M)
+1 M
Draw sketch of BB vs rr showing linear rise to surface and 1/r1/r decay outside (1.0M)
+1 M
NCERT / CBSE Model Answer
Step-by-step Solution:
Ampere's Circuital Law: ∮B⃗⋅dl⃗=μ0Ienclosed\oint \vec{B} \cdot d\vec{l} = \mu_0 I_{\text{enclosed}}.
(a) Outside the cylinder (r>ar > a) [1 Mark]:
- Consider an Amperian circular loop of radius r>ar > a concentric with the conductor.
- ∮B⃗⋅dl⃗=B(2πr)\oint \vec{B} \cdot d\vec{l} = B(2\pi r).
- Total current enclosed is II.
B(2πr)=μ0I  ⟹  B=μ0I2πr(B∝1r)B(2\pi r) = \mu_0 I \implies B = \frac{\mu_0 I}{2\pi r} \quad \left(B \propto \frac{1}{r}\right)
(b) Inside the cylinder (r<ar < a) [1 Mark]:
- Consider an Amperian circular loop of radius r<ar < a.
- Current density J=Iπa2J = \frac{I}{\pi a^2}.
- Current enclosed by the loop of radius rr:
Ienclosed=J⋅(πr2)=Iπa2⋅πr2=Ir2a2I_{\text{enclosed}} = J \cdot (\pi r^2) = \frac{I}{\pi a^2} \cdot \pi r^2 = I \frac{r^2}{a^2}

- Applying Ampere's Law:
B(2πr)=μ0Ir2a2  ⟹  B=μ0Ir2πa2(B∝r)B(2\pi r) = \mu_0 I \frac{r^2}{a^2} \implies B = \frac{\mu_0 I r}{2\pi a^2} \quad (B \propto r)
(c) Plot of BB vs rr [1 Mark]:
- Straight line through origin for r<ar < a (B∝rB \propto r).
- Peak value Bmax⁡=μ0I2πaB_{\max} = \frac{\mu_0 I}{2\pi a} at the surface r=ar = a.
- Hyperbolic decay curve for r>ar > a (B∝1/rB \propto 1/r).
Chief Examiner Evaluation Report & Pitfalls:

Inside a solid conductor, magnetic field is proportional to $r$ ($B \propto r$); outside it drops as $1/r$.

24
Section C(3-Mark Short Answer Questions)
3 Marks
State the working principle of an AC generator. Derive an expression for the instantaneous induced electromotive force (emf) generated in a coil of NN turns and area AA rotating with constant angular velocity ω\omega in a uniform magnetic field BB.
CBSE Official Step-Marking AllocationTotal: 3 M
State working principle based on Faraday's electromagnetic induction (1.0M)
+1 M
Write flux Φ=NBAcos⁡(ωt)\Phi = NBA \cos(\omega t) and differentiate to obtain e=NBAωsin⁡(ωt)e = NBA\omega \sin(\omega t) (2.0M)
+2 M
NCERT / CBSE Model Answer
Step-by-step Solution:
1. Principle [1 Mark]:
- An AC generator works on the principle of electromagnetic induction.
- When a closed coil is rotated in a uniform magnetic field about an axis perpendicular to the field, the magnetic flux linked with the coil changes continuously, inducing an alternating emf across its terminals.
2. Derivation [2 Marks]:
- Let the coil have NN turns, cross-sectional area AA, and rotate with angular speed ω\omega.
- At time tt, angle between magnetic field B⃗\vec{B} and area vector A⃗\vec{A} is θ=ωt\theta = \omega t.
- Magnetic flux linked with the coil at time tt is:
Φ(t)=N(B⃗⋅A⃗)=NBAcos⁡(ωt)\Phi(t) = N(\vec{B} \cdot \vec{A}) = N B A \cos(\omega t)

- By Faraday's Law of Induction, the induced emf is:
e=−dΦdt=−ddt[NBAcos⁡(ωt)]=−NBA[−ωsin⁡(ωt)]e = -\frac{d\Phi}{dt} = -\frac{d}{dt}[N B A \cos(\omega t)] = -N B A [-\omega \sin(\omega t)]

e=NBAωsin⁡(ωt)e = N B A \omega \sin(\omega t)

- Letting peak emf e0=NBAωe_0 = N B A \omega, the instantaneous induced emf is:
e=e0sin⁡(ωt)e = e_0 \sin(\omega t)
Chief Examiner Evaluation Report & Pitfalls:

Peak emf is $e_0 = N B A \omega$. State clearly that $e$ oscillates sinusoidally.

25
Section C(3-Mark Short Answer Questions)
3 Marks
(a) A biconvex lens of focal length ff made of glass of refractive index ng=1.6n_g = 1.6 is immersed in a liquid of refractive index nl=1.3n_l = 1.3. Find the new focal length of the lens in terms of ff.
(b) What will happen if the same lens is immersed in a liquid of refractive index nl=1.8n_l = 1.8?
CBSE Official Step-Marking AllocationTotal: 3 M
Use lens maker formula ratio flfa=ng−1ng/nl−1=0.60.3/1.3=2.6\frac{f_l}{f_a} = \frac{n_g - 1}{n_g/n_l - 1} = \frac{0.6}{0.3/1.3} = 2.6 (2.0M)
+2 M
State that for nl>ngn_l > n_g, nature of lens reverses from converging to diverging (1.0M)
+1 M
NCERT / CBSE Model Answer
Step-by-step Solution:
(a) New Focal Length in Liquid (nl=1.3n_l = 1.3) [2 Marks]:
1. By Lens Maker's Formula in air:
1fa=(ng−1)(1R1−1R2)=(1.6−1)K=0.6K  ⟹  K=10.6fa\frac{1}{f_a} = (n_g - 1) \left( \frac{1}{R_1} - \frac{1}{R_2} \right) = (1.6 - 1) K = 0.6 K \implies K = \frac{1}{0.6 f_a}

2. In liquid of refractive index nl=1.3n_l = 1.3:
1fl=(ngnl−1)K=(1.61.3−1)K=(0.31.3)(10.6fa)\frac{1}{f_l} = \left( \frac{n_g}{n_l} - 1 \right) K = \left( \frac{1.6}{1.3} - 1 \right) K = \left( \frac{0.3}{1.3} \right) \left( \frac{1}{0.6 f_a} \right)

1fl=0.31.3×0.6fa=12.6fa\frac{1}{f_l} = \frac{0.3}{1.3 \times 0.6 f_a} = \frac{1}{2.6 f_a}

fl=2.6faf_l = 2.6 f_a

Hence, the focal length increases by a factor of 2.62.6.
(b) Behaviour in Liquid with nl=1.8n_l = 1.8 [1 Mark]:
- Here nl>ngn_l > n_g (1.8>1.61.8 > 1.6), so (ngnl−1)=(1.61.8−1)=−0.21.8<0\left(\frac{n_g}{n_l} - 1\right) = \left(\frac{1.6}{1.8} - 1\right) = -\frac{0.2}{1.8} < 0.
- The sign of the focal length reverses, meaning the biconvex (converging) lens behaves as a diverging (concave) lens.
Chief Examiner Evaluation Report & Pitfalls:

When immersed in a medium denser than glass ($n_m > n_g$), the lens changes its character (convex becomes diverging, concave becomes converging).

26
Section C(3-Mark Short Answer Questions)
3 Marks
Draw a neat ray diagram showing the formation of an image by an astronomical refracting telescope in normal adjustment (final image at infinity). Write the expression for its magnifying power and length of the telescope tube in this adjustment.
CBSE Official Step-Marking AllocationTotal: 3 M
Draw complete ray diagram with objective and eyepiece focal planes coinciding at A'B' (1.5M)
+1.5 M
State magnifying power m=−fo/fem = -f_o / f_e (1.0M)
+1 M
State tube length L=fo+feL = f_o + f_e (0.5M)
+0.5 M
NCERT / CBSE Model Answer
Step-by-step Solution:
1. Ray Diagram [1.5 Marks]:
- Objective lens of large aperture and long focal length fof_o collects parallel rays from a distant star and forms an inverted real image A′B′A'B' at its second focal point FoF_o.
- Eyepiece lens of smaller aperture and short focal length fef_e is adjusted so that A′B′A'B' lies exactly at its first focal point FeF_e.
- Rays emerging from the eyepiece form parallel beams, resulting in the final image at infinity (D=∞D = \infty).
2. Magnifying Power [1 Mark]:
- In normal adjustment:
m=−fofem = -\frac{f_o}{f_e}

(Negative sign indicates an inverted final image).
3. Length of Telescope Tube [0.5 Mark]:
- Separation between objective and eyepiece:
L=fo+feL = f_o + f_e
Chief Examiner Evaluation Report & Pitfalls:

Normal adjustment means final image at infinity; tube length is $f_o + f_e$.

27
Section C(3-Mark Short Answer Questions)
3 Marks
Using Huygens' principle, verify Snell's law of refraction of light for a plane wavefront incident on a plane boundary separating two transparent media of refractive indices n1n_1 and n2n_2 (n2>n1n_2 > n_1).
CBSE Official Step-Marking AllocationTotal: 3 M
Draw incident wavefront AB and refracted wavefront CD with speeds v1,v2v_1, v_2 (1.0M)
+1 M
Write trigonometric relations for sin⁡i=v1τ/AC\sin i = v_1\tau/AC and sin⁡r=v2τ/AC\sin r = v_2\tau/AC (1.5M)
+1.5 M
Derive ratio sin⁡isin⁡r=v1v2=n2n1\frac{\sin i}{\sin r} = \frac{v_1}{v_2} = \frac{n_2}{n_1} proving Snell's law (0.5M)
+0.5 M
NCERT / CBSE Model Answer
Step-by-step Solution:
1. Wavefront Geometry [1 Mark]:
- Let ABAB be a plane wavefront incident at angle ii on the interface PP′PP' separating medium 1 (speed v1v_1) and medium 2 (speed v2v_2).
- Let τ\tau be the time taken by the wave to travel from point BB to CC on the interface: BC=v1τBC = v_1 \tau.
- During this time τ\tau, secondary wavelets from point AA propagate into medium 2 covering distance AD=v2τAD = v_2 \tau.
- The tangent plane CDCD drawn from CC to the wavelet sphere centered at AA constitutes the refracted plane wavefront inclined at angle rr.
2. Geometrical Derivation [1.5 Marks]:
- In right-angled △ABC\triangle ABC:
sin⁡i=BCAC=v1τAC\sin i = \frac{BC}{AC} = \frac{v_1 \tau}{AC}

- In right-angled △ADC\triangle ADC:
sin⁡r=ADAC=v2τAC\sin r = \frac{AD}{AC} = \frac{v_2 \tau}{AC}

3. Ratio & Snell's Law [0.5 Mark]:
- Dividing the two equations:
sin⁡isin⁡r=v1τ/ACv2τ/AC=v1v2\frac{\sin i}{\sin r} = \frac{v_1 \tau / AC}{v_2 \tau / AC} = \frac{v_1}{v_2}

- Since refractive index n=c/vn = c/v, v1v2=n2n1\frac{v_1}{v_2} = \frac{n_2}{n_1}:
sin⁡isin⁡r=n2n1  ⟹  n1sin⁡i=n2sin⁡r\frac{\sin i}{\sin r} = \frac{n_2}{n_1} \implies n_1 \sin i = n_2 \sin r

This proves Snell's law of refraction.
Chief Examiner Evaluation Report & Pitfalls:

Show right-angled triangles $\triangle ABC$ and $\triangle ADC$ sharing common hypotenuse $AC$.

28
Section C(3-Mark Short Answer Questions)
3 Marks
In a Young's double slit experiment using monochromatic light of wavelength λ\lambda, the intensity of light at a point on the screen where path difference is λ\lambda is KK units. Find the intensity at a point on the screen where the path difference is:
(a) λ3\frac{\lambda}{3}
(b) λ4\frac{\lambda}{4}
(c) λ2\frac{\lambda}{2}
CBSE Official Step-Marking AllocationTotal: 3 M
Part (a): Δx=λ/3  ⟹  I=K/4\Delta x = \lambda/3 \implies I = K/4 (1.0M)
+1 M
Part (b): Δx=λ/4  ⟹  I=K/2\Delta x = \lambda/4 \implies I = K/2 (1.0M)
+1 M
Part (c): Δx=λ/2  ⟹  I=0\Delta x = \lambda/2 \implies I = 0 (1.0M)
+1 M
NCERT / CBSE Model Answer
Step-by-step Solution:
1. Phase difference ϕ\phi is related to path difference Δx\Delta x by:
ϕ=2πλΔx\phi = \frac{2\pi}{\lambda} \Delta x

2. The resultant intensity of two coherent waves of equal intensity I0I_0 is:
I=4I0cos⁡2(ϕ2)I = 4I_0 \cos^2\left(\frac{\phi}{2}\right)

3. When path difference is λ\lambda, ϕ=2π\phi = 2\pi:
I=4I0cos⁡2(π)=4I0(1)=K  ⟹  4I0=KI = 4I_0 \cos^2(\pi) = 4I_0 (1) = K \implies 4I_0 = K

Thus, I=Kcos⁡2(ϕ2)I = K \cos^2\left(\frac{\phi}{2}\right).
(a) Path difference Δx=λ3\Delta x = \frac{\lambda}{3} [1 Mark]:
- ϕa=2πλ(λ3)=2π3\phi_a = \frac{2\pi}{\lambda} \left(\frac{\lambda}{3}\right) = \frac{2\pi}{3}.
- Ia=Kcos⁡2(π3)=K(12)2=K4I_a = K \cos^2\left(\frac{\pi}{3}\right) = K \left(\frac{1}{2}\right)^2 = \frac{K}{4}.
(b) Path difference Δx=λ4\Delta x = \frac{\lambda}{4} [1 Mark]:
- ϕb=2πλ(λ4)=π2\phi_b = \frac{2\pi}{\lambda} \left(\frac{\lambda}{4}\right) = \frac{\pi}{2}.
- Ib=Kcos⁡2(π4)=K(12)2=K2I_b = K \cos^2\left(\frac{\pi}{4}\right) = K \left(\frac{1}{\sqrt{2}}\right)^2 = \frac{K}{2}.
(c) Path difference Δx=λ2\Delta x = \frac{\lambda}{2} [1 Mark]:
- ϕc=2πλ(λ2)=π\phi_c = \frac{2\pi}{\lambda} \left(\frac{\lambda}{2}\right) = \pi.
- Ic=Kcos⁡2(π2)=K(0)=0I_c = K \cos^2\left(\frac{\pi}{2}\right) = K (0) = 0.
Chief Examiner Evaluation Report & Pitfalls:

General formula for intensity in YDSE: $I = I_{\max} \cos^2(\phi/2) = K \cos^2(\pi \Delta x / \lambda)$.

29
Section D(4-Mark Case-Based Integrated Study (Electrostatics: Dielectrics in Capacitors))
4 Marks
A parallel plate capacitor consists of two identical metallic plates each of area AA separated by a distance dd. The space between the plates is initially filled with air. The capacitor is connected across a battery of voltage V0V_0 until it is fully charged to charge Q0Q_0 and then the battery is disconnected. A dielectric slab of dielectric constant KK and thickness dd is now inserted to completely fill the space between the plates.
Answer the following questions:
(i) What happens to the capacitance of the capacitor? [1 Mark]
(ii) What happens to the charge on the capacitor plates? Justify. [1 Mark]
(iii) Calculate the new potential difference between the plates and the new electrostatic energy stored in the capacitor. [2 Marks]
CBSE Official Step-Marking AllocationTotal: 4 M
Subpart (i): State that capacitance increases by factor KK (C=KC0C = K C_0)
+1 M
Subpart (ii): State that charge remains constant (Q=Q0Q = Q_0) because battery was disconnected
+1 M
Subpart (iii): Calculate new potential V=V0/KV = V_0/K and energy U=U0/KU = U_0/K
+2 M
NCERT / CBSE Model Answer
Step-by-step Solution:
(i) Capacitance [1 Mark]:
- When a dielectric of constant KK completely fills the gap, the capacitance increases by a factor of KK:
C=KC0=Kε0AdC = K C_0 = \frac{K \varepsilon_0 A}{d}
(ii) Charge on the Plates [1 Mark]:
- The battery was disconnected before the dielectric slab was inserted.
- Because the plates form an isolated system with no external conduction path for electrons to leave or enter, the charge remains conserved:
Q=Q0=constantQ = Q_0 = \text{constant}
(iii) Potential Difference and Electrostatic Energy [2 Marks]:
- Potential Difference:
V=QC=Q0KC0=V0KV = \frac{Q}{C} = \frac{Q_0}{K C_0} = \frac{V_0}{K}

The potential difference decreases by a factor of KK. [1 Mark]
- Stored Energy:
U=Q22C=Q022KC0=U0KU = \frac{Q^2}{2C} = \frac{Q_0^2}{2 K C_0} = \frac{U_0}{K}

The electrostatic energy decreases by a factor of KK. The decrease in stored energy (ΔU=U0−U0/K\Delta U = U_0 - U_0/K) is transformed into mechanical work done by the electrostatic field in pulling the dielectric slab into the capacitor plates. [1 Mark]
Chief Examiner Evaluation Report & Pitfalls:

Distinguish between the two cases: battery disconnected ($Q = \text{const}, V \downarrow$) versus battery remains connected ($V = \text{const}, Q \uparrow$).

30
Section D(4-Mark Case-Based Integrated Study (Modern Physics: Photoelectric Effect))
4 Marks
In a study of the photoelectric effect, monochromatic light of variable frequency ν\nu is incident on two different photosensitive metals AA and BB. A plot of stopping potential V0V_0 versus incident frequency ν\nu yields two parallel straight lines, with metal AA intercepting the frequency axis at ν0A=4×1014 Hz\nu_{0A} = 4 \times 10^{14}\text{ Hz} and metal BB intercepting at ν0B=7×1014 Hz\nu_{0B} = 7 \times 10^{14}\text{ Hz}.
Answer the following questions:
(i) Which of the two metals has a higher work function? Justify your answer. [1 Mark]
(ii) Find the slope of the V0V_0 vs ν\nu graph. Does the slope depend on the nature of the photosensitive material? [1 Mark]
(iii) If incident radiation of wavelength λ=450 nm\lambda = 450\text{ nm} is shone on both metals, which metal will exhibit photoelectric emission? Calculate the maximum kinetic energy of emitted photoelectrons from that metal (in eV\text{eV}). [2 Marks]
CBSE Official Step-Marking AllocationTotal: 4 M
Subpart (i): Identify metal B has higher work function due to higher threshold frequency (1.0M)
+1 M
Subpart (ii): State slope is h/eh/e, a universal constant independent of material (1.0M)
+1 M
Subpart (iii): Compare photon energy (2.76 eV2.76\text{ eV}) with work functions and compute Kmax⁡=1.10 eVK_{\max} = 1.10\text{ eV} for Metal A (2.0M)
+2 M
NCERT / CBSE Model Answer
Step-by-step Solution:
(i) Work Function Comparison [1 Mark]:
- Work function is given by Φ0=hν0\Phi_0 = h \nu_0.
- Since ν0B=7×1014 Hz>ν0A=4×1014 Hz\nu_{0B} = 7 \times 10^{14}\text{ Hz} > \nu_{0A} = 4 \times 10^{14}\text{ Hz}, Metal B has a higher work function (Φ0B>Φ0A\Phi_{0B} > \Phi_{0A}).
(ii) Slope of the Graph [1 Mark]:
- Rearranging Einstein's equation eV0=hν−hν0eV_0 = h\nu - h\nu_0 gives:
V0=(he)ν−Φ0eV_0 = \left(\frac{h}{e}\right)\nu - \frac{\Phi_0}{e}

- The slope of the line is he\frac{h}{e}.
- Since Planck's constant hh and electronic charge ee are universal constants, the slope is universal and completely independent of the nature of the material.
(iii) Emission & Kinetic Energy for λ=450 nm\lambda = 450\text{ nm} [2 Marks]:
1. Energy of incident photon:
E=hcλ=1240 eV⋅nm450 nm=2.756 eVE = \frac{hc}{\lambda} = \frac{1240\text{ eV}\cdot\text{nm}}{450\text{ nm}} = 2.756\text{ eV}

2. Work function of Metal A:
Φ0A=hν0A=(6.63×10−34 J⋅s)(4×1014 s−1)1.6×10−19 J/eV=1.658 eV\Phi_{0A} = h\nu_{0A} = \frac{(6.63 \times 10^{-34}\text{ J}\cdot\text{s})(4 \times 10^{14}\text{ s}^{-1})}{1.6 \times 10^{-19}\text{ J/eV}} = 1.658\text{ eV}

3. Work function of Metal B:
Φ0B=hν0B=(6.63×10−34)(7×1014)1.6×10−19=2.90 eV\Phi_{0B} = h\nu_{0B} = \frac{(6.63 \times 10^{-34})(7 \times 10^{14})}{1.6 \times 10^{-19}} = 2.90\text{ eV}

4. Since E=2.76 eV>Φ0A=1.66 eVE = 2.76\text{ eV} > \Phi_{0A} = 1.66\text{ eV}, only Metal A will exhibit photoelectric emission (E<Φ0BE < \Phi_{0B} for Metal B).
5. Maximum kinetic energy from Metal A:
Kmax⁡=E−Φ0A=2.756 eV−1.658 eV≈1.10 eVK_{\max} = E - \Phi_{0A} = 2.756\text{ eV} - 1.658\text{ eV} \approx 1.10\text{ eV}
Chief Examiner Evaluation Report & Pitfalls:

The slope of the $V_0 - \nu$ graph is always $h/e$ for all photosensitive metals. Lines for different metals are strictly parallel.

31
Section E(5-Mark Long Answer Questions)
Internal Choice (OR)5 Marks
(a) State Gauss's law in electrostatics. Using Gauss's law, derive an expression for the electric field due to an infinitely long straight uniformly charged wire of linear charge density λ\lambda.
OR
(b) Define electric dipole moment. Derive an expression for the electric potential at a general point P(r,θ)P(r, \theta) due to an electric dipole of dipole moment p⃗\vec{p}. Hence find the potential at (i) an axial point, and (ii) an equatorial point.
CBSE Official Step-Marking AllocationTotal: 5 M
Part (a): State Gauss's Law (1.0M)
+1 M
Part (a): Set up cylindrical Gaussian surface with zero end-cap flux and E(2πrl)E(2\pi rl) curved flux (2.0M)
+2 M
Part (a): Equate to λl/ε0\lambda l / \varepsilon_0 and derive E=λ2πε0rE = \frac{\lambda}{2\pi\varepsilon_0 r} (2.0M)
+2 M
NCERT / CBSE Model Answer
Solution for (a):
1. Gauss's Law Statement [1 Mark]:
- The total electric flux ΦE\Phi_E through any closed Gaussian surface in free space is equal to 1ε0\frac{1}{\varepsilon_0} times the total charge qenclosedq_{\text{enclosed}} enclosed by that surface:
∮E⃗⋅dA⃗=qenclosedε0\oint \vec{E} \cdot d\vec{A} = \frac{q_{\text{enclosed}}}{\varepsilon_0}

2. Derivation for Infinite Line Charge [4 Marks]:
- Consider an infinitely long straight wire carrying uniform linear charge density λ\lambda.
- By cylindrical symmetry, the electric field E⃗\vec{E} is directed radially outward perpendicular to the wire.
- Choose a cylindrical Gaussian surface of radius rr and length ll coaxial with the wire.
- Flux through the two circular flat end caps:
Φcaps=∫capsE⃗⋅dA⃗=0(since E⃗⊥dA⃗)\Phi_{\text{caps}} = \int_{\text{caps}} \vec{E} \cdot d\vec{A} = 0 \quad (\text{since } \vec{E} \perp d\vec{A})

- Flux through the curved cylindrical surface:
Φcurved=∫E dAcos⁡0∘=E∫dA=E(2πrl)\Phi_{\text{curved}} = \int E \, dA \cos 0^\circ = E \int dA = E(2\pi r l)

- Total charge enclosed inside the Gaussian cylinder:
qenclosed=λlq_{\text{enclosed}} = \lambda l

- Applying Gauss's law:
E(2πrl)=λlε0  ⟹  E=λ2πε0rE(2\pi r l) = \frac{\lambda l}{\varepsilon_0} \implies E = \frac{\lambda}{2\pi \varepsilon_0 r}

In vector notation: E⃗=λ2πε0rn^\vec{E} = \frac{\lambda}{2\pi \varepsilon_0 r}\hat{n}.

Alternative Option Solution:

1. Electric Dipole Moment [1 Mark]:
- p⃗=q(2a⃗)\vec{p} = q(2\vec{a}), directed from negative charge −q-q to positive charge +q+q.
2. Potential at P(r,θ)P(r, \theta) [3 Marks]:
- Potential due to dipole of length 2a2a:
V(r,θ)=14πε0pcos⁡θr2V(r, \theta) = \frac{1}{4\pi\varepsilon_0} \frac{p \cos\theta}{r^2}

3. Special Cases [1 Mark]:
- (i) Axial point (θ=0∘\theta = 0^\circ or 180∘180^\circ): V=±p4πε0r2V = \pm \frac{p}{4\pi\varepsilon_0 r^2}.
- (ii) Equatorial point (θ=90∘\theta = 90^\circ): V=pcos⁡90∘4πε0r2=0V = \frac{p \cos 90^\circ}{4\pi\varepsilon_0 r^2} = 0.
Chief Examiner Evaluation Report & Pitfalls:

State explicitly why flux through circular caps is zero: $\vec{E}$ is perpendicular to cap normal $d\vec{A}$.

32
Section E(5-Mark Long Answer Questions)
Internal Choice (OR)5 Marks
(a) An AC source v=vmsin⁡(ωt)v = v_m \sin(\omega t) is connected across a series LCR circuit.
(i) Using phasor diagram method, derive an expression for the impedance ZZ and the phase angle ϕ\phi between voltage and current.
(ii) State the condition for resonance in this circuit and derive the expression for resonant angular frequency ωr\omega_r.
OR
(b)
(i) Describe the construction, working principle, and energy losses in a step-up transformer.
(ii) A step-up transformer converts 220 V220\text{ V} into 2200 V2200\text{ V}. If the primary coil has 100100 turns, find the number of turns in the secondary coil.
CBSE Official Step-Marking AllocationTotal: 5 M
Part (a): Draw phasor diagram showing voltage phasors VR,VL,VCV_R, V_L, V_C (1.5M)
+1.5 M
Part (a): Derive impedance Z=R2+(XL−XC)2Z = \sqrt{R^2 + (X_L - X_C)^2} and phase angle tan⁡ϕ\tan\phi (1.5M)
+1.5 M
Part (a): Set XL=XCX_L = X_C and derive ωr=1/LC\omega_r = 1/\sqrt{LC} (2.0M)
+2 M
NCERT / CBSE Model Answer
Solution for (a):
1. Phasor Diagram & Impedance [3 Marks]:
- Current i=imsin⁡(ωt)i = i_m \sin(\omega t) flows common to all components.
- Voltage across resistor: vR=iRv_R = i R in phase with ii.
- Voltage across inductor: vL=iXLv_L = i X_L leading ii by π/2\pi/2, where XL=ωLX_L = \omega L.
- Voltage across capacitor: vC=iXCv_C = i X_C lagging ii by π/2\pi/2, where XC=1ωCX_C = \frac{1}{\omega C}.
- Net reactive voltage is (vL−vC)(v_L - v_C) along vertical phasor axis.
- By Pythagoras theorem on the voltage phasor triangle:
vm2=vR2+(vL−vC)2=(imR)2+(imXL−imXC)2=im2[R2+(XL−XC)2]v_m^2 = v_R^2 + (v_L - v_C)^2 = (i_m R)^2 + (i_m X_L - i_m X_C)^2 = i_m^2 [R^2 + (X_L - X_C)^2]

- Impedance Z=vmimZ = \frac{v_m}{i_m}:
Z=R2+(XL−XC)2=R2+(ωL−1ωC)2Z = \sqrt{R^2 + (X_L - X_C)^2} = \sqrt{R^2 + \left(\omega L - \frac{1}{\omega C}\right)^2}

- Phase angle ϕ\phi:
tan⁡ϕ=XL−XCR=ωL−1ωCR\tan\phi = \frac{X_L - X_C}{R} = \frac{\omega L - \frac{1}{\omega C}}{R}

2. Resonance Condition [2 Marks]:
- Resonance occurs when current amplitude is maximum, which requires minimum impedance Z=RZ = R.
- This occurs when inductive reactance equals capacitive reactance:
XL=XC  ⟹  ωrL=1ωrC  ⟹  ωr2=1LCX_L = X_C \implies \omega_r L = \frac{1}{\omega_r C} \implies \omega_r^2 = \frac{1}{LC}

- Resonant angular frequency:
ωr=1LC\omega_r = \frac{1}{\sqrt{LC}}

Alternative Option Solution:

1. Transformer Principle & Construction [3 Marks]:
- Works on mutual induction between two magnetically coupled coils wound on a laminated soft iron core.
- Turns ratio: VsVp=NsNp\frac{V_s}{V_p} = \frac{N_s}{N_p}.
- Energy losses: Copper loss (I2RI^2R), Eddy current loss (minimized by laminations), Hysteresis loss (minimized by soft iron), and Flux leakage.
2. Numerical [2 Marks]:
- NsNp=VsVp  ⟹  Ns=Np(VsVp)=100(2200220)=100×10=1000 turns\frac{N_s}{N_p} = \frac{V_s}{V_p} \implies N_s = N_p \left(\frac{V_s}{V_p}\right) = 100 \left(\frac{2200}{220}\right) = 100 \times 10 = 1000\text{ turns}.
Chief Examiner Evaluation Report & Pitfalls:

At resonance, impedance is purely resistive ($Z = R$), current is in phase with voltage (power factor $\cos\phi = 1$), and current amplitude is maximum.

33
Section E(5-Mark Long Answer Questions)
Internal Choice (OR)5 Marks
(a) Draw a ray diagram for refraction through a triangular glass prism. Derive the prism formula relating angle of prism AA, angle of minimum deviation DmD_m, and refractive index nn of the prism material.
OR
(b) State the conditions for constructive and destructive interference in terms of path difference. In Young's double slit experiment, derive an expression for the fringe width β\beta of interference fringes formed on a distant screen.
CBSE Official Step-Marking AllocationTotal: 5 M
Part (a): Draw prism ray diagram with angles i,r1,r2,e,δi, r_1, r_2, e, \delta (1.5M)
+1.5 M
Part (a): Prove geometric relations r1+r2=Ar_1 + r_2 = A and δ=i+e−A\delta = i + e - A (1.5M)
+1.5 M
Part (a): Set i=e,r1=r2i=e, r_1=r_2 at minimum deviation and derive prism formula n=sin⁡((A+Dm)/2)sin⁡(A/2)n = \frac{\sin((A+D_m)/2)}{\sin(A/2)} (2.0M)
+2 M
NCERT / CBSE Model Answer
Solution for (a):
1. Ray Diagram through Prism [1.5 Marks]:
- Ray PQPQ incident at angle ii on first face ABAB, refracts at angle r1r_1 along QRQR, and emerges from second face ACAC at angle of emergence ee with internal angle r2r_2.
2. Prism Angles Relations [1.5 Marks]:
- In quadrilateral AQNRAQNR, ∠A+∠QNR=180∘\angle A + \angle QNR = 180^\circ.
- In △QNR\triangle QNR, r1+r2+∠QNR=180∘  ⟹  r1+r2=Ar_1 + r_2 + \angle QNR = 180^\circ \implies r_1 + r_2 = A.
- Total deviation: δ=(i−r1)+(e−r2)=(i+e)−(r1+r2)=i+e−A\delta = (i - r_1) + (e - r_2) = (i + e) - (r_1 + r_2) = i + e - A.
3. Minimum Deviation Condition [2 Marks]:
- At minimum deviation δ=Dm\delta = D_m, by symmetry: i=ei = e and r1=r2=rr_1 = r_2 = r.
- Therefore:
2r=A  ⟹  r=A22r = A \implies r = \frac{A}{2}

Dm=2i−A  ⟹  i=A+Dm2D_m = 2i - A \implies i = \frac{A + D_m}{2}

- Applying Snell's law at the first refracting face (n=sin⁡isin⁡rn = \frac{\sin i}{\sin r}):
n=sin⁡(A+Dm2)sin⁡(A2)n = \frac{\sin\left(\frac{A + D_m}{2}\right)}{\sin\left(\frac{A}{2}\right)}

This is the celebrated Prism Formula.

Alternative Option Solution:

1. Interference Conditions [1.5 Marks]:
- Constructive interference (Bright fringe): Path difference Δx=nλ\Delta x = n\lambda, where n=0,1,2,…n = 0, 1, 2, \dots
- Destructive interference (Dark fringe): Path difference Δx=(2n−1)λ2\Delta x = (2n - 1)\frac{\lambda}{2}, where n=1,2,3,…n = 1, 2, 3, \dots
2. Fringe Width Derivation [3.5 Marks]:
- Let two coherent slits S1,S2S_1, S_2 be separated by distance dd, and screen placed at distance DD.
- Path difference at point PP at distance yy from central maximum:
Δx=S2P−S1P=2ydS2P+S1P≈ydD\Delta x = S_2 P - S_1 P = \frac{2yd}{S_2P + S_1P} \approx \frac{yd}{D}

- Position of nthn^{\text{th}} bright fringe: yn=nλDdy_n = \frac{n\lambda D}{d}.
- Fringe width β=yn+1−yn\beta = y_{n+1} - y_n:
β=(n+1)λDd−nλDd=λDd\beta = \frac{(n+1)\lambda D}{d} - \frac{n\lambda D}{d} = \frac{\lambda D}{d}
Chief Examiner Evaluation Report & Pitfalls:

At minimum deviation, the refracted ray inside the prism travels parallel to the base of the prism for an equilateral/isosceles prism.