(a) Primary amine
(b) Secondary amine
(c) Tertiary amine
(d) Quaternary ammonium salt
- Primary amines () react with benzenesulphonyl chloride to form -alkylbenzenesulphonamide, which has an acidic hydrogen attached to nitrogen and therefore dissolves in aqueous alkali (KOH/NaOH).
- Secondary amines () react with benzenesulphonyl chloride to form -dialkylbenzenesulphonamide. This product has no acidic hydrogen attached to the nitrogen atom and is therefore insoluble in alkali.
- Tertiary amines do not react with benzenesulphonyl chloride.
Hence, the amine is a secondary amine.
Hinsberg test: $1^\circ$ amine product dissolves in alkali; $2^\circ$ amine product is insoluble; $3^\circ$ amine does not react.
(a)
(b)
(c)
(d)
Dipole moment is the product of partial charge () and bond length (): .
Although fluorine is the most electronegative element, the bond length is exceptionally small (). The larger bond distance () in more than compensates for the smaller electronegativity difference, giving the highest dipole moment () compared to ().
The order is: .
This is an exceptional textbook NCERT case where bond length overcompensates for electronegativity difference.
- Column I:
(i) Highest enthalpy of atomization
(ii) Metal with maximum number of oxidation states
(iii) Liquid transition metal at room temperature
- Column II:
(A) Mercury (Hg)
(B) Manganese (Mn)
(C) Vanadium (V)(a) (i)-(C), (ii)-(B), (iii)-(A)
(b) (i)-(A), (ii)-(B), (iii)-(C)
(c) (i)-(B), (ii)-(A), (iii)-(C)
(d) (i)-(C), (ii)-(A), (iii)-(B)
- (i) Vanadium (V) has high enthalpy of atomization due to strong metallic bonding involving electrons (C).
- (ii) Manganese (Mn) has electronic configuration and exhibits the maximum number of oxidation states from to (B).
- (iii) Mercury (Hg) has completely filled -orbitals () with no unpaired electrons for metallic bonding, making it a liquid metal at room temperature (A).
Manganese exhibits the largest number of oxidation states (+2 to +7) in the 3d transition series.
(a) 1-Bromobutane
(b) 2-Bromobutane
(c) 1-Bromo-2-methylpropane
(d) 2-Bromo-2-methylpropane
For isomeric alkyl halides, boiling point decreases with increased branching because branching makes the molecule more spherical, decreasing its surface area and weakening van der Waals intermolecular attractive forces. 2-Bromo-2-methylpropane (tert-butyl bromide) is the most branched spherical isomer, having the minimum surface area and hence the lowest boiling point.
Boiling point order of isomeric butyl bromides: primary > secondary > tertiary.
(a)
(b)
(c)
(d)
Look at the units of rate constant: .
This unit indicates a zero-order reaction ().
For a zero-order reaction, the half-life is given by:
Substituting given values:
Always check units of $k$! For first-order it is $\text{s}^{-1}$, but for zero-order it is $\text{mol L}^{-1}\text{s}^{-1}$.
(a) Two molecules of benzoic acid
(b) Benzoic acid and ethanoic acid
(c) Two molecules of ethanoic acid
(d) Benzaldehyde and ethanol
Hydrolysis of an unsymmetrical acid anhydride yields the two corresponding parent carboxylic acids:
Product: Benzoic acid and ethanoic acid.
Acid anhydrides on hydrolysis yield the two carboxylic acids from which they were synthesized.
(a) 1
(b) 2
(c) 3
(d) 4
Ionization in aqueous solution:
The complex produces:
- 1 complex cation
- 1 chloride counter-anion
Total number of ions produced = ions.
Only counter-ions outside the coordination bracket $[\dots]$ ionize in aqueous solution.
(a) Starch
(b) Cellulose
(c) Glycogen
(d) Maltose
- Starch: polymer composed exclusively of -D-glucose units (amylose and amylopectin).
- Glycogen: highly branched polymer composed exclusively of -D-glucose units.
- Maltose: disaccharide consisting of two -D-glucose units joined by glycosidic linkage.
- Cellulose: linear straight-chain polysaccharide consisting exclusively of -D-glucose units joined by glycosidic linkages.
Cellulose is non-digestible by humans because human enzymes cannot hydrolyze $\beta-(1\to 4)$ glycosidic bonds.
(a)
(b)
(c)
(d)
Paramagnetic character depends on the number of unpaired electrons ():
- :
- :
- : (one paired pair, 4 unpaired electrons)
- : (half-filled -subshell, maximum unpaired electrons)Increasing order of unpaired electrons: .
Therefore, order of paramagnetism is: .
Do not count total $d$-electrons; count strictly UNPAIRED electrons: $\text{Fe}^{2+}$ is $3d^6$, which has 4 unpaired electrons.
(a)
(b)
(c)
(d) It never goes to completion
For a first-order reaction:
Substituting :
For first-order reactions, half-life is strictly independent of the initial concentration.
(a) Nitrobenzene
(b) Benzonitrile
(c) Benzamide
(d) Chlorobenzene
Reduction of nitrobenzene () with iron scrap and hydrochloric acid () is the preferred laboratory and industrial method for preparing aniline ():
This method is preferred because formed gets hydrolyzed to release , requiring only a small catalytic amount of .
Fe/HCl is preferred over Sn/HCl industrially because the generated $\text{FeCl}_2$ hydrolyzes back to regenerate $\text{HCl}$.
(a)
(b)
(c)
(d)
Carbonyl compounds (aldehydes and ketones) undergo nucleophilic addition-elimination reactions with hydroxylamine () to form oximes:
Acetaldehyde forms acetaldoxime. Carboxylic acids, alcohols, and ethers do not give this reaction.
Hydroxylamine specifically identifies the presence of a carbonyl group ($>\text{C}=\text{O}$) in aldehydes and ketones.
Reason (R): With increase in size and mass of the halogen atom, the magnitude of van der Waals forces of attraction increases.(a) Both (A) and (R) are true and (R) is the correct explanation of (A).
(b) Both (A) and (R) are true but (R) is not the correct explanation of (A).
(c) (A) is true but (R) is false.
(d) (A) is false but (R) is true.
- Assertion (A): For a given alkyl group, the boiling points follow the order . Assertion is TRUE.
- Reason (R): Iodine has the largest atomic size and molar mass, resulting in the largest polarizable electron cloud and strongest intermolecular van der Waals forces. Hence, requires maximum thermal energy to vaporize. Reason is TRUE.
- Reason (R) correctly explains Assertion (A).
Van der Waals forces increase directly with increase in molecular weight and surface area.
Reason (R): Transition metals can adopt multiple oxidation states and provide large surface areas with vacant -orbitals for forming reaction intermediates.(a) Both (A) and (R) are true and (R) is the correct explanation of (A).
(b) Both (A) and (R) are true but (R) is not the correct explanation of (A).
(c) (A) is true but (R) is false.
(d) (A) is false but (R) is true.
- Transition metals act as excellent catalysts (e.g. in Contact process, finely divided Fe in Haber's process).
- Their catalytic activity is attributed to: (i) ability to exhibit variable oxidation states to form intermediate complexes, and (ii) presence of partially filled -orbitals that adsorb reactant molecules on their surface, lowering the activation energy.
- Both statements are true, and Reason (R) correctly explains Assertion (A).
Variable oxidation states allow transition metals to provide alternative pathways with lower activation energy.
Reason (R): The open-chain penta-hydroxy aldehyde form of D-glucose exists in equilibrium with two cyclic hemiacetal forms ( and ), with the cyclic forms predominating.(a) Both (A) and (R) are true and (R) is the correct explanation of (A).
(b) Both (A) and (R) are true but (R) is not the correct explanation of (A).
(c) (A) is true but (R) is false.
(d) (A) is false but (R) is true.
- Assertion (A): Despite having an aldehyde group, glucose fails to give the Schiff's test, does not react with , and glucose pentaacetate does not react with hydroxylamine. Assertion is TRUE.
- Reason (R): The group is not free; it forms a cyclic six-membered pyranose ring via intramolecular hemiacetal formation between the at C-1 and the group at C-5. Because the free concentration is extremely low (), it fails to undergo these typical aldehyde reactions. Reason is TRUE.
- Reason (R) correctly explains Assertion (A).
This classic evidence proved that D-glucose exists predominantly as cyclic $\alpha$- and $\beta$-pyranose rings.
Reason (R): For a zero-order reaction, the rate of reaction is independent of the concentration of reactants.(a) Both (A) and (R) are true and (R) is the correct explanation of (A).
(b) Both (A) and (R) are true but (R) is not the correct explanation of (A).
(c) (A) is true but (R) is false.
(d) (A) is false but (R) is true.
- Assertion (A): For a zero-order reaction, . Half-life is directly proportional to initial concentration , NOT independent of it! (It is first-order reactions that have concentration-independent half-life). Hence, Assertion (A) is FALSE.
- Reason (R): For a zero-order reaction, . The rate is independent of reactant concentration. Hence, Reason (R) is TRUE.
Thus, (A) is false but (R) is true.
Never confuse zero-order with first-order half-life! Zero-order: $t_{1/2} \propto [R]_0$. First-order: $t_{1/2} = 0.693/k$ (independent of $[R]_0$).
(b) A mixture of chloroform and acetone boils at , whereas pure chloroform boils at and pure acetone boils at . What type of deviation from Raoult's law does this solution exhibit, and why?OR(a) Why do soda bottles go 'flat' faster at high altitudes like Srinagar than at sea level?
(b) Why does adding salt or sugar protect fruits and pickles from bacterial decay?
(a) By Henry's Law, .
The solubility of a gas () is inversely proportional to its Henry's law constant . As temperature increases, increases (from to ), and gas dissolution is an exothermic process (). By Le Chatelier's principle, solubility decreases with increase in temperature.(b) The boiling point of the mixture () is higher than the boiling points of both pure components ( and ). This indicates that the vapor pressure of the mixture is lower than expected, meaning the solution exhibits negative deviation from Raoult's law and forms a maximum boiling azeotrope. This occurs because hydrogen bonding between chloroform and acetone () is stronger than solute-solute and solvent-solvent interactions.
Alternative Option Solution:
(a) Atmospheric pressure is significantly lower at high altitudes (Srinagar). By Henry's Law (), the lower partial pressure of above the beverage reduces the solubility of , causing dissolved gas to escape faster and the soda to go flat rapidly.(b) High concentrations of sugar or salt create a hypertonic medium. When bacteria come in contact with this medium, water moves out of the bacterial cells due to osmosis (plasmolysis), causing the bacterial cells to shrivel and die.
Maximum boiling azeotrope corresponds to negative deviation; minimum boiling azeotrope corresponds to positive deviation.
(b) What type of isomerism is shown by and ?
(a) IUPAC Name:
- Cation: Potassium
- Complex anion:
- Ligands in alphabetical order: diaqua (for ), dioxalato (for )
- Oxidation state of Cr: .
- Since complex is an anion, metal name ends in '-ate': chromate(III).
- Hydrate: monohydrate.
These two complexes exhibit Ionization isomerism.
They have the same empirical formula but give different ions in aqueous solution:
- (gives yellow precipitate with )
- (gives white precipitate with )
Alphabetical order of ligands: 'diaqua' precedes 'dioxalato' ('a' comes before 'o').
(a) Write the cell reaction and calculate standard emf of the cell (). Given: , .
(b) What will happen if an external opposing potential is applied to this cell?
(a)
- Anode (oxidation):
- Cathode (reduction):
- Net Cell Reaction:
- Standard emf:
The cell reaction is reversed, and the electrochemical cell acts as an electrolytic cell.
Electrons flow from Cu to Zn, current flows from Zn to Cu, zinc is deposited at the zinc electrode, and copper dissolves from the copper electrode.
When $E_{\text{ext}} = 1.1\text{ V}$, current stops ($I=0$). When $E_{\text{ext}} > 1.1\text{ V}$, it functions as an electrolytic cell.
(a)
(b)
(a) Addition of in the presence of organic peroxides follows the anti-Markovnikov rule (Kharasch effect), where the bromine free radical attacks the less substituted carbon atom:
Major Product: 1-Bromopropane.(b) Silver cyanide () is predominantly covalent in nature. Nitrogen possesses an unshared pair of electrons and acts as the nucleophilic center:
Major Product: Ethyl isocyanide (or ethyl carbylamine).
Contrast: KCN gives alkyl cyanide ($R-\text{CN}$) because it is ionic; AgCN gives alkyl isocyanide ($R-\text{NC}$) because it is covalent.
1. Reaction with Hydroxylamine ():
D-glucose reacts with hydroxylamine to form glucose oxime (glucomonoxime), confirming the presence of a carbonyl group ():
Bromine water is a mild oxidizing agent that selectively oxidizes the aldehyde group () to a carboxylic acid group () without affecting the alcohol groups, forming gluconic acid:
Product: Gluconic acid.
Mild $\text{Br}_2/\text{H}_2\text{O}$ oxidizes only the $-\text{CHO}$ group (giving gluconic acid), whereas strong $\text{HNO}_3$ oxidizes both $-\text{CHO}$ and primary $-\text{CH}_2\text{OH}$ (giving saccharic acid).
(b) State Kohlrausch's law of independent migration of ions.
(c) Express the limiting molar conductivity of in terms of the limiting molar conductivities of its constituent ions.
(a) Electrolysis of aqueous with Pt electrodes:
- At Cathode (, reduction): ( is preferred over reduction of water ).
- At Anode (, oxidation): (preferred over oxidation of water due to overpotential of oxygen).(b) Kohlrausch's Law:
At infinite dilution, when dissociation of electrolyte is complete, each ion makes a definite independent contribution to the total molar conductivity of the electrolyte, irrespective of the nature of the co-ion with which it is associated:
Do not forget the stoichiometric coefficients (2 for $\text{Al}^{3+}$ and 3 for $\text{SO}_4^{2-}$).
(a) The lowest oxide of a transition metal is basic, whereas the highest oxide is acidic.
(b) Chromium is a hard solid with a high melting point, whereas mercury is a liquid at room temperature.
(c) (atomic number 40) and (atomic number 72) have almost identical atomic and ionic radii.
(a) In lower oxidation states, the metal has low positive charge density and contains unshared valence electrons that are not involved in bonding, enabling it to donate electrons (Lewis base / ionic character). In higher oxidation states, the metal has high positive charge density and electronegativity, so its -orbitals are empty and it strongly polarizes oxygen atoms (covalent character), allowing it to accept electron pairs (Lewis acid).(b) Chromium () has 6 valence electrons (maximum unpaired electrons) available for strong interatomic metallic and covalent bonding, resulting in a rigid lattice and high melting point. Mercury () has completely filled -orbitals with no unpaired electrons, resulting in very weak metallic bonding and causing it to be liquid at room temperature.(c) Due to Lanthanoid Contraction: The filling of subshell before the series in Hafnium results in poor shielding of the nuclear charge by electrons. Consequently, the effective nuclear charge increases, pulling outer electron shells inward and compensating for the expected size increase due to an additional shell, making radii of and nearly identical ( and ).
Always mention the imperfect shielding of $4f$ electrons when explaining Lanthanoid contraction.
(b) How will you convert benzaldehyde to acetophenone in two steps?
(c) Write the chemical test to distinguish between benzaldehyde and acetaldehyde.
(a) Étard Reaction:
-nitrotoluene is oxidized by chromyl chloride () in to form a brown chromium complex, which on subsequent acidic hydrolysis yields -nitrobenzaldehyde:
- Step 1: Reaction with methyl magnesium bromide (Grignard reagent) followed by hydrolysis:
- Step 2: Oxidation of secondary alcohol with PCC or acidic :
Acetaldehyde () contains a group and gives a yellow precipitate of iodoform () when heated with and :
Benzaldehyde does not contain a methyl ketone/methyl carbonyl group and does not give the iodoform test.
Fehling's test also distinguishes them: acetaldehyde reduces Fehling's solution to red $\text{Cu}_2\text{O}$; benzaldehyde does not.
(b) What are essential amino acids? Give one example.
(c) Differentiate between globular and fibrous proteins with one example of each.
(a) Possible Dipeptides:
Four dipeptides can be formed:
1. Gly-Ala:
2. Ala-Gly:
3. Gly-Gly:
4. Ala-Ala: (b) Essential Amino Acids:
Amino acids that cannot be synthesized by the human body and must be supplied through the diet are called essential amino acids.
Example: Valine, Leucine, Isoleucine, Lysine.(c) Globular vs Fibrous Proteins:
- Fibrous Proteins: Polypeptide chains run parallel and are held together by hydrogen and disulphide bonds, forming fiber-like structures. Insoluble in water. Example: Keratin (in hair/wool), Myosin (in muscles).
- Globular Proteins: Polypeptide chains coil around to give a spherical shape. Soluble in water. Example: Insulin, Albumin, Hemoglobin.
Highlight the peptide bond $-\text{C}(=\text{O})-\text{NH}-$ clearly when writing peptide structures.
(b) Why does dehydration of ethanol at yield diethyl ether instead of ethene?
(a) Mechanism of Dehydration of Ethanol to Ethene ():
- Step 1: Protonation of alcohol:
Ethanol acts as a Lewis base and accepts a proton from the acid to form protonated alcohol (ethyloxonium ion):
- Step 2: Formation of carbocation (Slow, Rate-determining step):
Water is eliminated to generate an ethyl carbocation:
- Step 3: Elimination of proton (Fast):
A proton is eliminated from the -carbon by the base to regenerate the acid catalyst and form ethene:
At the lower temperature of in the presence of excess ethanol, the protonated ethanol undergoes nucleophilic bimolecular substitution () with another unprotonated ethanol molecule rather than unimolecular elimination ():
Elimination has higher activation energy and requires higher temperature ().
Always indicate curved electron-pushing arrows and state that carbocation formation is the slow rate-determining step.
Identify compounds and . Write all the reactions involved.
1. Deduction:
- Compound gives immediate turbidity with Lucas reagent is a tertiary () alcohol.
- Since the molecular formula of is , the only tertiary alcohol with 4 carbons is 2-methylpropan-2-ol (tert-butyl alcohol):
- Therefore, precursor is 2-chloro-2-methylpropane (tert-butyl chloride):
- Dehydrohalogenation of with alcoholic gives an alkene :
- Ozonolysis of yields acetone and formaldehyde:
This confirms acetone is formed.2. Identification:
- Compound : 2-Chloro-2-methylpropane []
- Compound : 2-Methylpropan-2-ol []
- Compound : 2-Methylpropene []
Turbidity timing in Lucas test: $3^\circ$ alcohol = instantaneous, $2^\circ$ alcohol = 5 minutes, $1^\circ$ alcohol = no turbidity at room temperature.
Given: , , .
1. Standard Cell Potential ():
- Cathode (reduction): ()
- Anode (oxidation): ()
- Number of electrons transferred (): LCM of 2 and 3 is .
Do not forget to balance electron count: $3\text{Sn}^{4+} + 6e^- \to 3\text{Sn}^{2+}$ and $2\text{Al} \to 2\text{Al}^{3+} + 6e^-$, so $n = 6$.
The rate of a chemical reaction is governed by the concentrations of the reactants and the reaction mechanism. For the gas-phase reaction between hydrogen and bromine:
Experimental measurements establish the differential rate law as:
(a) What is the overall order of the reaction and what are the SI units of rate constant ? [1 Mark]
(b) If the concentration of is tripled while keeping the concentration of constant, how will the rate of reaction change? [1 Mark]
(c) For an elementary reaction , compare the molecularity and order. [1 Mark]
(d) Two proposed mechanisms are:
Mechanism 1: (slow); (fast)
Mechanism 2: (slow); (fast)
If the experimentally observed rate law is , which mechanism is consistent with experimental findings and why? [1 Mark]OR(b) In the reaction , if the concentration of is made 9 times its original value, by what factor must be altered so that the overall reaction rate remains constant? [1 Mark]
(a) Overall order .
Units of rate constant :
The rate of reaction increases by a factor of .(c) For an elementary reaction, molecularity and order are identical. Both represent the number of colliding species in the single-step process (here molecularity = order = 2, bimolecular).(d) The slowest step is the rate-determining step (RDS).
- For Mechanism 1: (first order in A, independent of B).
- For Mechanism 2: (first order in both A and B).
Since the experimental rate law is , Mechanism 2 is consistent with the experimental findings.
Alternative Option Solution:
When :
For the rate to remain constant ():
Thus, the concentration of must be reduced to one-third of its original value.
Rate-determining step determines the theoretical rate law; fast steps after the RDS do not enter the rate equation directly.
Amines are organic bases that accept protons due to the presence of an unshared pair of electrons on the nitrogen atom. The basic strength of an amine in aqueous solution is quantified by its base dissociation constant or value (). A lower value indicates a stronger base. The basicity is influenced by three factors: inductive effect (), steric hindrance of alkyl groups, and solvation energy of the substituted ammonium cation.Based on the above information, answer the following questions:
(a) Arrange the following in decreasing order of basic strength in aqueous solution: . [1 Mark]
(b) Why is aniline a weaker base than cyclohexylamine? [1 Mark]
(c) What is the effect of an electron-withdrawing group () on the basic strength of aromatic amines? [1 Mark]
(d) Write the reaction showing the acylation of ethanamine with ethanoyl chloride. [1 Mark]OR(c) Arrange the following in increasing order of their values: . [1 Mark]
(a) In aqueous solution, considering inductive (), steric hindrance, and solvation effects together, the basic strength order for methyl-substituted amines is:
Order: .(b) In aniline, the unshared electron pair on nitrogen is delocalized over the benzene ring through resonance ( effect), making it less available for protonation. Furthermore, the anilinium ion formed has only two resonance structures, while aniline has five, so protonation is destabilizing. In cyclohexylamine, the lone pair on nitrogen is localized (no resonance) and the cyclohexyl ring exerts a effect, making it a much stronger base.(c) An electron-withdrawing group () exerts strong and effects, pulling electron density away from the nitrogen atom and destabilizing the conjugate anilinium ion. This significantly decreases the basic strength (and increases ).(d) Acylation of Ethanamine:
Product: N-Ethylethanamide (or N-ethylacetamide). Pyridine is added to neutralize and shift equilibrium forward.
Alternative Option Solution:
Higher basicity corresponds to smaller . Therefore, increasing order of values corresponds to decreasing order of basicity:Basicity order: .
Increasing order of :
For methyl amines: $2^\circ > 1^\circ > 3^\circ$ (order 213). For ethyl amines: $2^\circ > 3^\circ > 1^\circ$ (order 231).
(i) Identify compounds and .
(ii) Write balanced ionic equations for the reaction of acidified compound with: (1) Iodide ions (), and (2) Oxalate ions ().
(b) Using valence bond theory, predict the hybridization, geometry, and magnetic behavior of . (Atomic number of ).OR(II) (a) Explain why ion is not stable in aqueous solutions.
(b) Calculate the spin-only magnetic moment of ion.
(c) Write IUPAC name and draw geometrical isomers of .
(I) (a) (i) Identification:
- Green mass : Potassium manganate ()
- Purple compound : Potassium permanganate ()
1. With Iodide () in acidic medium:
2. With Oxalate () in acidic medium:
- Electronic configuration of : .
- Oxidation state of is : .
- is a strong field ligand, forcing pairing of electrons in orbitals:
6 electrons pair up into three orbitals (), leaving two empty orbitals.
- Available empty orbitals: two , one , three .
- Hybridization: (inner orbital / low-spin complex).
- Geometry: Octahedral.
- Magnetic Behavior: Diamagnetic (all electrons are paired, ).
Alternative Option Solution:
(a) is unstable in aqueous solution and readily disproportionates:This is because the hydration enthalpy of is much more negative (higher) than that of due to its smaller ionic radius and higher charge density, which more than compensates for the second ionization enthalpy of copper.(b) For : . Number of unpaired electrons .
Spin-only magnetic moment:
- cis-isomer: Both ligands are adjacent (); used as antitumor drug Cisplatin.
- trans-isomer: ligands are opposite ().
In $[\text{Co}(\text{NH}_3)_6]^{3+}$, ammonia acts as a strong field ligand with $+3$ cobalt, causing complete electron pairing.
(i) Kolbe's reaction
(ii) Reimer-Tiemann reaction
(iii) Williamson ether synthesis
(b) Give reasons:
(i) Phenol is more acidic than ethanol.
(ii) -Nitrophenol is steam volatile, while -nitrophenol is not.OR(II) (a) How will you synthesize:
(i) Salicylic acid from phenol
(ii) 2-Methoxy-2-methylpropane from an alkene
(b) Write the mechanism of the reaction of hydrogen iodide () with methoxymethane.
(I) (a) Named Organic Reactions:
1. Kolbe's Reaction:
Sodium phenoxide is heated with carbon dioxide at and , followed by acidification, yielding salicylic acid (2-hydroxybenzoic acid) as major product:
Phenol is treated with chloroform () in the presence of aqueous at , followed by hydrolysis, introducing a group ortho to to form salicylaldehyde (dichlorocarbene :<div class="my-3 overflow-x-auto text-center py-2 px-3 bg-slate-50 border border-slate-200 rounded-lg"><span class="katex-error" title="ParseError: KaTeX parse error: Can't use function '' in math mode at position 13: \text{CCl}_2̲ is the electro…" style="color:#cc0000">\text{CCl}_2 is the electrophile):
Reaction of a primary alkyl halide with a sodium alkoxide via an pathway:
1. Phenol vs Ethanol Acidity:
Phenoxide ion () formed by losing a proton is stabilized by resonance delocalization of the negative charge over the benzene ring. In contrast, ethoxide ion () has localized charge and is destabilized by the inductive effect of the ethyl group. Hence, phenol is more acidic.
2. Volatility of - vs -nitrophenol:
-Nitrophenol possesses intramolecular hydrogen bonding (chelation) between adjacent and groups, preventing intermolecular association and lowering boiling point (steam volatile). -Nitrophenol possesses intermolecular hydrogen bonding, forming large associated molecular networks with high boiling point (not steam volatile).
Alternative Option Solution:
(a) (i) Salicylic acid from Phenol:- Step 1: Add in the absence of peroxides (Markovnikov addition) to form tert-butyl bromide:
- Step 1: Protonation of ether to form oxonium ion:
In Williamson synthesis of alkyl tert-butyl ethers, the alkoxide MUST be tertiary and the halide MUST be primary ($1^\circ$) to prevent alkene elimination.
(i) the molar mass of the solute,
(ii) the vapor pressure of pure water at .
(b) Define osmotic pressure. Why is osmotic pressure measurement preferred over other colligative properties for determining the molar mass of biomolecules like proteins and polymers?OR(II) (a) State Raoult's law for a solution containing non-volatile solute.
(b) Calculate the freezing point of an aqueous solution containing of cane sugar (sucrose, ) if the freezing point of pure water is . Given: for water .
(c) What is the van 't Hoff factor () for completely dissociated potassium ferricyanide ?
(I) (a)
Let be the vapor pressure of pure water and be the molar mass of the non-volatile solute.
Number of moles of water initially: .
Number of moles of solute: .1. From Raoult's law:
2. When of water is added, total moles of water become :
3. Dividing equation (1) by equation (2):
4. Finding pure water vapor pressure :
- Definition: The excess hydrostatic pressure that must be applied to the solution side to prevent the osmosis of solvent molecules through a semipermeable membrane.
- Why preferred for biomolecules:
1. Pressure is measured at room temperature (around ), preventing thermal denaturation or decomposition of biomolecules.
2. It uses molarity instead of molality.
3. Its magnitude is significantly large even for highly dilute solutions (), allowing precise measurement.
Alternative Option Solution:
(a) Raoult's Law:For a solution containing a non-volatile solute, the relative lowering of vapor pressure is equal to the mole fraction of the solute: .(b) Freezing Point Calculation:
by mass solution: sucrose in water.
Molality :
Depression in freezing point:
Freezing point of solution:
Dissociation: .
Total number of ions produced per formula unit .
For dissociation: .
Writing $\frac{p^\circ}{p} = 1 + \frac{n_2}{n_1}$ avoids awkward nested denominators and prevents algebraic mistakes.